W5500 Ethernet Shield Ethernet controller expansion board iot IoT solution

Description

Product description 

The W5500 Ethernet Shield v1.0 can provide internet connection for your projects. W5500 enables users to implement Internet connection in applications by using a single chip which has TCP/IP stack, 10/100 Ethernet MAC and PHY embedded. It also features two Grove connectors and a microSD card slot for supporting projects that require storing large amounts of data in Grove sensors. The RJ45 port (where the ethernet cable connects to) is low enough that you can use more shields.

• Support fixed-line TCP/IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
• Supports 8 independent outlets simultaneously
• Support power-down mode
• Supports Wake-on-LAN over UDP
• Supports high-speed serial peripheral interface (SPI mode 0, 3)
• Internal 32K byte memory for TX/RX buffers
• 10BaseT/100BaseTX Ethernet PHY Embedded
• Supports auto-negotiation (full-duplex and half-duplex, 10 and 100* based)
• Does not support IP fragmentation
• 3.3V Operation with 5V Tolerant I/O Signals
• LED Output (Full/Half Duplex, Link, Speed, Active)
• Micro-SD card slot