For Arduino Voltage And Current Sensor Consume Current Voltage Load Detection Module

Description

This module can be used to test the current and voltage
The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller
for analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V).for AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage detection module is 0.00489Vx5=0.02445V
The MAX471 chip on the board used to test the consume current of the load
Parameters:
Test Voltage range: DC3 – 25V (for work on 5V) or DC3 – 16.5V (for work on 3.3V)
Test Current range: DC0 – 3A
PCB Size: 22*21*7mm/0.86*0.82*0.27″